Blue Angel Pumps BALE311A - Manual

REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
Please read and save these instructions. Read carefully before attempting to assemble,
install, operate or maintain the product described. Protect yourself and others by observing
all safety information. Failure to comply with instructions could result in personal injury
and/or property damage! Retain instructions for future reference.
Description
An effluent system consists of a pump,
control switch and a basin. The system
is generally controlled by a float switch
with a piggy-back plug which accepts
the pump plug and in turn plugs into
an electrical outlet.
The float switch is a wide angle
differential switch that rises with the
liquid level and turns the pump on. As
the liquid level decreases, the float
lowers and turns the pump off. This
pump is intended for use in domestic
sump or effluent lift stations. It is
suitable for pumping effluent,
wastewater, ground water and other
non-explosive, non-corrosive liquids
with up to 3/4” solids.
Effluent
pumps
will not pump raw sewage or any
substance exceeding 3/4” size.
Operating Instructions and Parts Manual BALE Series
332600-002 3/08
Safety Guidelines
This manual contains information that
is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger
indicates
an imminently hazardous situation
which, if not avoided, WILL result in
death or serious injury.
Warning
indicates
a potentially hazardous situation
which, if not avoided, COULD result in
death or serious injury.
Caution
indicates
a potentially hazardous situation
which, if not avoided, MAY result in
minor or moderate injury.
Notice
indicates
important information, that if not
followed, MAY cause damage to
equipment.
CALIFORNIA PROPOSITION 65
This
product
or its power cord contains lead, a
chemical known to the State of
California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
General Safety
Information
1. Know the pump application,
limitations, and potential hazards.
Do not use to pump
flammable or explosive fluids
such as gasoline, fuel oil,
kerosene, etc. Do not use in flammable
and/or explosive atmospheres. Use pump
only with liquids compatible with pump
component materials. Failure to follow
this warning can result in personal
injury and/or property damage.
2. Make certain that the power source
conforms to the requirements of
this effluent pump.
Disconnect power before
servicing. If the power
disconnect is out of sight,
lock in the open position and tag it to
prevent unexpected application of
power. Failure to do so could result in
fatal electrical shock!
3. Release all pressure within the
system before servicing any
component.
4. Drain all liquids from the system
before servicing.
5. Secure the discharge line before
starting the pump. An unsecured
discharge line will whip, possibly
causing personal injury and/or
property damage.
6. Check hoses for weak and worn
condition before each use, making
certain that all connections are
secure.
© 2008 Blue Angel™ Pumps
The Professional’s Line
Specifications
Power supply requirements ..................115V, 60 hz (BALE311A)
................................................................ 115V, 60 hz (BALE411A)
................................................................ 115V, 60 hz (BALE511A)
................................................................ 230V, 60 hz (BALE521A)
................................................................ 230V, 60 hz (BALE621)
Motor duty.............................................Intermittent
Motor .....................................................1 Phase, 3450 RPM
Horsepower ..........................................3/10 HP 6.0 amps (BALE311A)
............ 4/10 HP 6.8 amps (BALE411A)
................................................................ 1/2 HP 10.5 amps (BALE511A)
................................................................ 1/2 HP 5.3 amps (BALE521A)
................................................................ 1 1 /
2
HP 16.0 amps (BALE621)
Liquid temperature range ....................40°F to 140°F
Discharge ...............................................1 1 /
2
inch NPT
Switch .....................................................90 o wide angle mechanical tether switch
............ (No switch on BALE621)
Power cord .............................................14 gauge 3 conductor w/plug
Length of Cord ......................................20 feet
Effluent Pump
For parts, product & service information
visit www.blueangelpumps.com
See Warranty on page 3 for important information about commercial use of this product.