Blue-White F-450N Polysulfone Molded - Manual

®
Your Blue-White F-450 Series
® Your Blue-White flowmeter was designed to be
easy to install.
Please read the Instruction Guideline on the next
page before installing your flowmeter.
This flowmeter is an instrument, special care
should be taken when handling and installing.
!
!
!
Inspection of the Flowmeter and Compatibility
!
!
!
!
!
!
Carefully inspect the meter for any damage that may have occurred during shipping.
Remove the plastic tubing that has been inserted during packaging for shipping
reasons.
Make sure your pressure, temperature, fluid and other requirements are compatible
with the meter before installation.
The maximum temperature capability decreases as the pressure increases. The max
PSI decreases as the temperature increases. See the chart on the following page.
® Although the meter may be suitable for other chemicals, Blue-White meters are tested
with water. If you are unsure of the meters compatibility with your chemical, please
consult the factory.
® Blue-White warranties the flowmeter for use with air and water only.
Installation Instructions
80000-441 09/18/2012
F-450N
Blue-White
Industries, Ltd.
R
Model No.
F-45330E
F-45375E
F-45376E
F-45500E
F-45750E
Dim A Dim B Dim C Dim D
9-7/8”
250.8mm
10”
254mm
3-1/2”
88mm
3-5/8”
92mm
2”
51mm
2”
51mm
8-9/16”
217.5mm
9”
228.6mm
A
D
B
C
A
D
C
B
A
B
Meter Body: Polysulfone
Float: 316SS, Hastelloy C-276, PVDF, or PTFE
(based on model)
Guide rod: # 316 Stainless (opt. Hastelloy C-276)
Adapters: Polysulfone
O-Rings: Viton (optional EP)
Scale: Permanent, dual scale silkscreen (black ink)
Max. PSIg: 175 PSIG / 12 BAR at 70°F/21°C
Max. Temp: 212°F / 100°C at 0 pressure
Accuracy: ± 4% of full scale reading
F-450N F-450NE
F-450NA
F-45330A
F-45375A
F-45376A
F-45500A
F-45750A
F-45750A
9-7/8”
250.8mm
10”
254mm
5”
127mm
5”
127mm
2”
51mm
2”
51mm
8-9/16”
217.5mm
9-1/8”
231.8mm
F-45330
F-45375
F-45376
F-45500
F-45750
8-7/8”
225.5mm
10”
254mm
1-3/4”
44.4mm
2”
51mm
N/A N/A
N/A N/A
Inline
Elbow
Adjustable