Blue-White F-410N Machined Acrylic Tube - Manual

Specifications
Meter Body: Acrylic, clear
Floats: #316 Stainless Steel or Hastelloy C-276
Adapters: Polypropylene with aluminum stress rings
O-Rings: Viton
Scale: Permanent Silkscreen
Max. Pressure: 150 PSIG / 10.3 BAR (see graph)
Max. Temperature: 150°F / 65.6°C (see graph)
Accuracy: ± 5% Full Scale
® Your Blue-White F-400 / F410 Series In-Line Flowmeter
® ! Your Blue-White flowmeter was designed to be easy to install.
! Please read the Instruction Guideline on the next page before installing your flowmeter.
! This flowmeter is an instrument, special care should be taken when handling and installing.
Inspection of the Flowmeter and Compatibility
! Carefully inspect the meter for any damage that may have occurred during shipping.
! Remove the plastic tubing that has been inserted during packaging for shipping reasons.
! Make sure your pressure, temperature, fluid and other requirements are compatible with the meter before
installation.
! The maximum temperature capability decreases as the pressure increases. The max PSI decreases as the
temperature increases. See the chart on the following page.
® ! Although the meter may be suitable for other chemicals, Blue-White meters are tested with water and air
only. If you are unsure of the meters compatibility with your chemical, please consult the factory.
® ! Blue-White warranties the flowmeter for use with air and water only.
F-40250N
F-40375N
A
8-3/16” (208.0mm)
8-3/16” (208.0mm)
Model Number
F-40376N
F-40377N
8-3/16” (208.0mm)
8-3/16” (208.0mm)
F-40500N 8-3/16” (208.0mm)
B
1-1/4” (31.75mm)
1-1/4” (31.75mm)
1-1/4” (31.75mm)
1-1/4” (31.75mm)
1-1/4” (31.75mm)
F-40750N 11” (279.4mm)
F-41017N 11” (279.4mm)
1-3/4” (44.45mm)
1-3/4” (44.45mm)
F-41000N 11” (279.4mm) 1-3/4” (44.45mm)
In. (mm) In. (mm)
Installation Instructions
F-400 & F-410
Blue-White
Industries, Ltd.
R
B
A
80000-362 09/18/2012