Caleffi 626 User Manual

Caleffi, 626 series

Advertising
background image

Flussostato
Flow switch
Strömungswächter
Flussostat
Flusostato
Fluxostato
Stromingsschakelaar

I

GB

D

F

E

P

NL

Il flussostato per acqua rileva la presenza o l'assenza di flusso nelle

tubazioni degli impianti di riscaldamento, condizionamento,

refrigerazione, trattamento delle acque, in sistemi di pompaggio, sistemi

di immissione additivi e sistemi di processo in genere. Negli impianti di

riscaldamento il flussostato ha il compito di provocare lo spegnimento del

bruciatore qualora venga a mancare la circolazione del fluido vettore nel

circuito caldaia. La mancanza di circolazione pregiudica l'intervento dei

dispositivi di sicurezza e protezione sensibili alla temperatura.

The Caleffi Series 626 water flow switch detects the presence or absence

of flow in pipework of heating, air conditioning, cooling and water

treatment systems as well as in pumping systems and process systems

in general. In heating systems the flow switch is normally used to shut off

the burner whenever there is no circulation of the carrier fluid in the boiler

circuit. A lack of circulation would otherwise impair the operation of the

temperature-sensitive safety and protection devices.

Der Strömungswächter Caleffi Serie 626 stellt das Vorhandensein oder

Fehlen von Durchfluß in Heizungs-, Kühl- und Wasseraufbereitungsanlagen,

Pumpensystemen, Dosieranlagen und Prozeßsystemen im allgemeinen

fest. In Heizungsanlagen hat der Strömungswächter die Aufgabe, den

Brenner abzuschalten, sollte das Trägermittel in der Anlage nicht mehr

oder nur in ungenügendem Maß zirkulieren.

Das Fehlen von Durchfluß beeinträchtigt das von der Temperatur

abhängige Funktionieren der Sicherheits- und Schutzeinrichtungen.

Le flussostat Caleffi série 626 signale la présence ou l'absence de débit

dans une canalisation d'une installation de chauffage, climatisation,

réfrigération, traitement des eaux, ou dans systèmes de pompage, de

remplissage, d'introduction d'additifs et de tous procédés industriels.

Dans les installations de chauffage, le flussostat a pour mission d'arréter

le brûleur en cas d'absence de débit dans la chaudière pour éviter

l'intervention des dispositifs de sécurité et de protection sensibles aux

variations de température.

Impiego
Operation
Einsatz
Emploi
Empleo
Utilização
Toepassing

68184.05

1

626 Series

www.caleffi.com

CALEFFI

Advertising