Alcatel Carrier Internetworking Solutions 4018 - Manual

English
3
Other
Customize your terminal
Modifying your personal code
Lock / unlock your telephone
follow
informations
displayed on the
screen
depending the displayed
informations, enter your
password or confirm*
Settings OK Options OR
Phone OK Password OK
Lock OK 2
6 5
3 ab c def
jkl mno
Adjusting the audio functions
Adjusting screen brightness
Using your telephone
Identify the terminal you are on
Making a call
adjust ringing (melody, volume,
mode,...) by following instructions
displayed on the screen
to return to the
home page
(long press)
increase or decrease the
contrast
apply to return to the
home page (long
press)
displays your
telephone number
to return to the
home page (long
press)
lift the receiver hands free programmed line
key
calling from your personal
directory
dial directly the
number for your
call
To make an external call, dial the outside line access code
before dialling your correspondent's number.
Settings OK Phone OK
Ringing OK
Settings OK Phone OK
Contrast OK OR
OK
WhoamI OK
OR OR
OR OK OR 2
6 5
3 ab c def
jkl mn o
3GV19008BSAAed01.fm Page 3 Mercredi, 4. juillet 2007 9:47 21
En
Alcatel-Lucent IP
T ouch 4018
Handset
„ Audio keys
„ Function keys
Hang-up key: to terminate a call.
Hands-free/Loudspeaker Key: to make or answer a call without lif-
ting the receiver (Alcatel-Lucent IP Touch 4008/IP Touch 4018 ).
• lit in hands-free mode or headset mode; (short press).
• flashing in loudspeaker mode (long press).
Intercom/Mute key:
• During a conversation: press this key so that your
correspondent can no longer hear you.
• Terminal idle: press this key to answer calls automatically
without picking up the receiver.
To adjust the loudspeaker or handset volume up or down
Messaging key to access various mail services
If the key flashes, a new voice message or a new text message has been
received.
'Redial' key : To access the 'Redial' function.
„ Navigation
Up-down navigator: used to navigate around the
home page, through the menus or in a text zone when
entering characters.
The home page consists of:
• Information on the status of the set (set
locked, call forward, etc.)
• Date and time
• Set programming and configuration
functions
OK key: used to validate your choices and options while programming or configu-
ring.
Back/Exit key: to return to previous menu (short press) or return to first screen
(long press). You can also use this key to correct a character you entered.
WhoamI
Lock
Settings
OK
„ Function keys and programmable keys
Guide key: Use to obtain information on the pre-programmed keys or to access
the set programming or configuration.
Phone book key : Phone book key to access your personal phone book (short
press) or to make a call by name (long press or press twice).
Pre-programmed function keys and programmable key
Lit when the function associated with the key is activated.
The 6-key block consists of:
„ two line keys,
„ one 'immediate forwarding or cancel call-forward' key,
„ one 'conference' key,
„ one 'transfer' key,
„ one direct call key to programme.
Alphanumeric keypad
To avoid accidentally damaging the set telephone line connector, make sure you position
the cord correctly in the compartment intended for this purpose.
Alcatel-Lucent IP Touch 4008 /
4018 Phone & 4019 Digital Phone
www.alcatel-lucent.com