Crystal 30 Series Digital Pressure Calibrator - Manual (Page 3)

Overview  1
30 Series Programming Instruction Manual
Overview
—
INTRODUCTION
Thank you for choosing the 30 Series Calibrator from Crystal Engineering Corporation. When connected to a personal computer, using a standard micro
USB cable, your 30 Series can be customized through the use of our free software, ConfigM30, available for download from
crystalengineering.net . Also
available for free download from our website are drivers for Labview®, a graphical programming language from National Instruments. The 30 Series can be
operated remotely, as if you were pressing the buttons. You can use a simple terminal program to send the commands, or you can incorporate them into your
own software program.
I/O Settings
Windows Certified drivers should be automatically downloaded from Microsoft and installed the first time a 30 Series product is connected to a PC via the USB
port. (If not, the driver is available for download from our website.) This driver is compatible with Windows XP, Vista and 7, both 32 and 64 bit versions.
The 30 series will be assigned to a COM port. Should you need to change the default settings, they are as follows:
Baud Rate Data Bits Parity Stop Bits Flow Control
4800 8 none 1 none