Crystal T-975-CPF Pneumatic Hand Pump - Manual (Page 6)

Overview  4
T-900 Series Pump Operation Manual
Parts Included with Pump Systems for Crystal Reference Indicators
System A System B System H
AXX
(T-960)
AHX
(T-970)
BXX
(T-965)
BHX
(T-975)
HOX
(T-975 and T-620H) Part Number Description
5238 3/8" BSP Male to CPF Male Fitting „ „ „ „ „
5252 5/16-24 SAE Male to CPF Female Fitting „ „ „ „ „
MPF-1/4FPT CPF Female to 1/4" NPT Female Fitting „ „ „ „ „ ( 2 )
MPF-1/4BSPF CPF Female to 1/4" BSP Female Fitting „ „ „ „ „ ( 2 )
MPF-1/8MPT * 1/8" MPT Fitting (for 30 Series Calibrator) „ ( 2 ) „ ( 2 ) „ ( 2 ) „ ( 2 ) „ ( 2 )
MPM-PLUG CPF Male Plug Fitting „
MPF-CAP CPF Female Cap Fitting „
MPH-1 1 meter CPF Male Hose „ „ „ „ „ ( 2 )
60R120 1/4" Bonded Seals „ ( 5 ) „ ( 5 ) „ ( 5 ) „ ( 5 ) „ ( 5 )
50-REP700 O-ring and Lock Clip „ ( 5 ) „ ( 5 ) „ ( 5 ) „ ( 5 ) „ ( 5 )
1351 * Test Leads; Red & Black, including clips „ „ „ „ „
5249 Protective Vinyl Cap „ ( 4 ) „ ( 4 ) „ ( 4 ) „ ( 4 ) „ ( 4 )
60I104 Pack Tape (1 roll) „ „ „ „ „
124004 Shoulder Strap „ „ „ „
124110 Aluminum Carrying Case (for nVision and 30 Series) „ „ „ „
125254 Aluminum Carrying Case (for XP2i and m1) „ „ „ „
2888 ** Waterproof Carrying Case     „
* The MPF-1/8MPT fittings and 1351 Test Leads are included only with Pump Systems for the 30 Series Calibrator.
** Pump Systems A and B may be ordered with a Waterproof Carrying Case. By entering -W in the pump system ordering code, the Shoulder Strap and Aluminum Carrying Case will be replaced by the Waterproof Carrying Case. See Ordering a Pump System below.
Carrying Case Options
Pump Systems A and B are delivered with an Aluminum Carrying
Case. Alternately, Pump Systems A and B may be ordered with a
Waterproof Carrying Case.
The Waterproof Carrying Case is the only option for Pump System H.
So, when ordering a Pump System H, add -E-W to designate a drained
pump in a waterproof case.
See
Ordering a Pump System below.
Ordering a Pump System
Any T-900 Series Pump System may be ordered with or without a reference indicator. The table below provides an explanation of the Pump System ordering
scheme when ordering a system without an indicator. For details on ordering the Pump Systems with an indicator, see the indicator datasheet.
Reference Indicator Reference Indicator Included Pump System Liquid (HOX only) Carrying Case
nVision . . . . NV No . . . -NONE System A (T-960) . . . . . . . . . . . . . . -AXX Drained . . . -E Aluminum . . . . (omit)
30 Series . . . IS30 System A (T-970) . . . . . . . . . . . . . . -AHX Waterproof . . . -W
XP2i . . . . . . . XP2i System B (T-965) . . . . . . . . . . . . . . -BXX
m1 . . . . . . . . . M1 System B (T-975) . . . . . . . . . . . . . . -BHX
System H (T-975 and T620H) . . . -HOX
X SAMPLE PART NUMBERS
IS30-NONE-HOX-E-W . . . System H pump system (for 30 Series) with a water-
proof case and the pump drained of fluid.
NV-NONE-AXX . . . . . . . . . . . . System A pump system (for nVision) with an
aluminum carrying case.
M1-NONE-BXX-W . . . . . . . . System B pump system (for m1) with a waterproof
carrying case.
15PSIXP2i-AXX-W . . . . . . . System A pump system with an XP2i gauge and a
waterproof carrying case.