Overview, Introduction – Crystal P-018-CPF Hydraulic Screw Pump User Manual
Page 3
Overview
1
P-Series Screw Pump Operation Manual
Overview
INTRODUCTION
The P-Series hydraulic screw pump you have chosen, is an extremely effective pressure pump, and we are confident that it will live up to your expectations.
Over the course of many years, we have acquired extensive knowledge of industrial precision pressure calibration. This expertise is reflected in our products,
all of which are designed for daily use in an industrial environment. If you have any ideas or suggestions for ways we might improve our products, we would
be very interested in hearing from you.
The P016, P017, and P-018-CPF hydraulic screw pumps are designed for easy, controlled, high pressure generation.
The screw pumps have a 4-connection manifold that can be used for the reference indicator, the device under test, a fine adjust, an isolation valve, or a fluid
reservoir. The reference indicator mounted on the pump can easily be adjusted for the best viewing angle by using the banjo connector set.
The P-Series hydraulic screw pump may be ordered as part of a Pump System, complete with a JOFRA or Crystal Pressure Indicator. P-Series Pump Systems
include the most commonly used pressure fittings, seals, etc. All packaged in a carrying case with custom insert.
X
P-Series Pumps
Pressure Range
Test Media
Media Specifics
Pump System
P016
350 bar / 5000 psi
Hydraulic Oil
Rando HDZ32
DOX
P017
350 bar / 5000 psi
Water
Distilled Water
DWX
P-018-CPF
350 bar / 5000 psi
Hydraulic Oil
or
Water
Rando HDZ32
or
Distilled Water
DOX
or
DWX