Crystal DataLoggerXP - Manual (Page 10)

DataLogger
XP
User’s Manual • Page 
C R Y S T A L e n g i n e e r i n g
c o r p o r a t i o n
The DataLoggerXP main window provides most of the functions of the application. From this
window, connecting to a gauge, changing data collection parameters, downloading and viewing
data, clearing data and switching operating modes can all be performed. The paragraphs below
offer additional information on each of these features.
„
Setting.the.Options
By default, DataLoggerXP is configured for automatic serial port detection. However, in some
cases automatic serial port detection may not work or cause undesirable results. To select a spe-
cific serial port, open the Options dialog box, by choosing View > Options. Select the serial port,
which is typically 1, and press OK to save any changes. If your installation supports additional
langauges, you can choose the language from the Select Language drop-down list. The settings
for Excel templates are covered in “Excel Templates”, on page 15.
„ Setting.the.Default.Unit
When in data logger mode, the gauge always measures pressure in the default engineering unit
of the gauge, such as PSI or kPa. Measuring in a different unit requires changing the default unit,
which can be done by selecting the File > Change Units menu option. Ensure the gauge is in data
logger mode prior to selecting this option, as the changing the default unit cannot be done while
in standard mode.
The Select Units dialog will display a drop down list of the available units. Simply select the de-
sired unit and click OK.