Dwyer CD - Manual

The Series CS Low Cost Diaphragm Pressure Switch is
ideal for instrument panels, small compressors and gen-
eral industrial applications. Visible set point and easy-to-
wire SPDT snap switch reduce installation time. This
switch operates in any position and is vibration resistant.
INSTALLATION/MOUNTING
The control can be pipe mounted. Do not twist the case
when installing. Use wrench on the pressure connection
flats.
WIRING
All wiring must conform to the National Electrical code
and local regulations. Do not install control to handle
loads in excess of electrical rating shown in specifications
or as indicated on instructions inside control cover.
Connect wiring to screw terminals depending on the
action required. Common and High contacts will close
and Common and Low contacts will open when increas-
ing pressure (or vacuum) reaches set point. The reverse
will occur when pressure (or vacuum) drops below the set
point less the deadband.
CAUTIONS: Do not oil any parts. Mount control securely.
Never exceed electrical rating for switch. Use only with
compatible.
WARNING
A failure resulting in injury or damage can be caused by
over-pressure, excessive vibration or pressure pulsation,
excessive temperature, corrosion of pressure containing
parts and movement assembly, electrical overload or
other misuse.
PHYSICAL DATA
Temperature Limits: -30 to 150°F (-34.4 to 65.6°C)
Pressure Connections:
1 /
4
″
NPT(F)
Electrical Ratings: 12 A @ 120 VAC; 8 A @ 240 VAC; 7A
@ 277 VAC;
1 /
8
HP @ 120 VAC; 1 /
4
HP @ 240 VAC
Switch Type: SPDT snap acting
Conduit Opening:
1 /
2
″
Wiring Connections: Three screw type, common, N.O.,
N.C.
Set Point Adjustment: Screw type, inside cover
Housing: Galvanized steel, NEMA 1
Diaphragm: Buna-N/Nylon
Calibration Spring: Plated steel
Installation: Any position
Weight:
1 /
2
lb. (0.23 kg)
Series CS Low Cost Diaphragm Pressure Switches
Specifications – Installation and Operating Instructions
Bulletin IN-619
©Copyright 2001 Dwyer Instruments, Inc. Printed in U.S.A. 4/01 FR#90-442119-00 Rev. 2
COMMON
ON HIGH
ON LOW
Model
No.
CS-1
CS-3
CS-10
CS-30
CS-150
Adjustable
Operating Range
1-30" Hg. Vac.
2.5-75 cm Hg.Vac
10-100" w.c.
2.5-250 cm w.c.
1-10 psig
0.07-0.7 kg/cm 2
1-30 psig
0.07-2.1 kg/cm 2
10-150 psig
0.07-10.5 kg/cm 2
Fixed Deadband
Maximum Minimum
1.5" Hg.
3.8 cm Hg. Vac
7" w.c.
17.8 cm w.c.
0.4 psig
0.03 kg/cm 2
1.0 psig
0.07 kg/cm 2
5 psig
0.35 kg/cm 2
30 psig
30 psig
30 psig
50 psig
175 psig
Max.
Pressure
1/2 [12.7]
CONDUIT HOLE
1-1/16
[26.99]
11/16
[17.46]
1-5/16
[33.34]
3-3/16
[80.96]
1/4 NPT
2-3/16
[55.56]
3
[76.2]
3-3/4
[95.25]
1" Hg. VAC
2.5 cm Hg. Vac
5" w.c.
12.7 cm w.c.
0.25 psig
0.02 kg/cm 2
0.5 psig
0.035 kg/cm 2
1.5 psig
0.1 kg/cm 2
MERCOID DIVISION
DWYER INSTRUMENTS, INC.
P.O. BOX 258 • MICHIGAN CITY, INDIANA 46361 U.S.A.
Phone: 219/879-8000 www.dwyer-inst.com
Fax: 219/872-9057 e-mail: [email protected]
Lit-by-Fax: 888/891-4963
WIRING DIAGRAM
TOP VIEW