Alpine CDE-9852 - Manual (Page 17)

16
-EN
Playing MP3/WMA Data (PLAY MODE)
This product can playback CDs containing both CD and MP3/WMA
data. However, in some situations (some enhanced CDs), playback may
be difficult. For these special cases, you can select playback of CD data
only. When a disc contains both CD or the MP3/WMA data, playback
starts from the CD data portion of the disc.
• Perform this setting before inserting a disc. If a disc has already been
inserted, perform the setting after you remove the disc.
Connecting to an External Amplifier
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
• No sound is produced by the system when the power output is set to
OFF.
An iPod™, iPod™ mini or iPod™ nano can be connected to the
CDE-9852 by using the proprietary ALPINE FULL SPEED™
Connection Cable (KCE-422i). When the CDE-9852 is connected by
using the cable, the controls on the iPod™ are not functional.
About iPods™ usable with this unit
The unit can be used with third generation and above iPod™
photo, iPod™ minis or iPod™ nano. iPod™ Shuffle cannot be
used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guranteed.
Third generation iPod:Ver. 2.3
Forth generation iPod:Ver. 3.0.2
iPod photo:Ver.1.0
iPod mini:Ver. 1.3
iPod nano:Ver. 1.0
• The unit cannot be used with the software versions earlier
than 22nd Feb.2005. For details about “iPod Software
Update”, refer to the iPod Instruction Manual.
Playback
1
Press SOURCE/POWER to switch to the iPod
mode.
2
Press or to select the desired song.
3
To pause playback, press / .
Pressing / again will resume playback.
• If a song is playing on the iPod when it is connected to the
CDE-9852, it will continue playing after the connection.
MP3/WMA
CDDA (Initial setting) / CDDA/MP3
CDDA: Only CD data can be played back.
CDDA/MP3: Both CD data and MP3/WMA file tracks can be
played back.
External Device
POWER IC ON (Initial setting) / POWER IC OFF
POWER IC OFF : Use this mode when the front pre-amplifier of
the unit are used to drive an external amplifier
connected to the speakers. In this setting, the
head unit’s internal amplifier has no output to
drive speakers.
POWER IC ON : The speakers are driven by the built-in
amplifier.
Amplifier
Front
left
Front
right
Speakers
SPEAKER
RIGHT FRONT
Front
right
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left
iPod™ (Optional)
Return to the beginning of the current song:
Press .
Fast backward:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward:
Press and hold .
SOURCE/POWER
MODE
Rotary
encoder
4 6 TITLE
/
5 A.ME