ATEN UN-201 - Manual (Page 6)

SuperLink Driver Installation
The SuperLink driver provides PC-to-PC file transfers between
two computers. To install the SuperLink driver:
1. Unzip the driver file archive located on the driver disk that
came with this package into a temporary directory on your
system.
2. Double click the Setup.exe icon to start the driver installation
program.
3. Choose USB SuperLink Adapter as the driver type to install,
and click on Next.
M If this is the first time SuperLink is being installed, the
default operation is to install it.
M If SuperLink has been previously installed, you can
choose whether to reinstall or to remove (uninstall) it.
Choose Reinstall, then click Next.
M If VirtualNetwork has been previously installed, you can
choose whether to only remove VirtualNetwork, or to
remove VirtualNetwork and install SuperLink. Choose
Remove VirtualNetwork and install SuperLink, then click
Next.
4. When prompted, click on Finish to complete the installation.
5. Repeat steps 1 - 4 for the second computer
6. Plug the USB 2.0 Data-Link Cable into the USB ports of both
computers, and wait a moment for Windows to recognize its
presence.
- 4 -
2003-04-15