Dwyer HCHP - Manual

Series HCHP Hydraulic Calibration Hand Pump
Specifications - Installation and Operating Instructions
Bulletin TE-HCHP
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46361, U.S.A. Fax: 219/872-9057 e-mail: [email protected]
The Series HCHP Hydraulic Calibration Hand Pump utilizes a
fully adjustable stroke control that allows for quick priming, easy
pumping and fast pressure generation up to 10,000 psi (700
bar). The ergonomically engineered handles provide extra
comfort, while the triple filtration system ensures pump operation
in spite of dirty conditions. The shatterproof reservoir and
stainless steel construction guarantee leak free operation. The
Series HCHP has oversized check valves to provide smooth
controlled operation.
INSTRUCTIONS
HIGH PRESSURE:
Uncontrolled release of high pressure is hazardous
to personnel and may cause damage to equipment.
Before connection of any pressure component to
the HCHP ensure that the component(s) is/are
isolated from the pressure source. Pressure built
up internally during use can be extremely high,
ensure that all connections are made correctly.
SPECIFICATIONS
Output Ranges: 0 to 10000 psi (0 to 700 bar).
Process Connection: 1/4˝ NPT/BSP.
Gauge Connection: 1/4˝ NPT/BSP.
Materials: SS, polyurethane, anodized hard-coat aluminum,
PTFE and nitrile.
Weight: 3 lb (1.36 kg).
Vernier Knob
Release Knob
Output Port
Prime Release
Knob
Pressure
Release
Valve
OPERATING INSTRUCTIONS
4-1/16
(103.19)
2-3/32
(53.18)
1/4 BSP WITH
1/4 NPT ADAPTER
1/4 BSP WITH
1/4 NPT
ADAPTER
1/4 NPT
PLUG
9-3/8
(238.13)
7-3/4
(196.85)
5-5/32
(130.97)
TE-HCHP:TEMPLATE 3/3/11 3:02 PM Page 1