American Power Conversion 200/208 V - Manual (Page 31)

990-2359A Smart-UPS® VT 10-30kVA, 200/208V and XR Battery Enclosure Operation Guide 23
Restart Procedure
Power application
 Set the utility breaker to the ON position.
 If your installation includes an XR Battery Enclosure with a DC disconnect switch, set the DC
disconnect switch to the ON position.
After system boot-up, the display will automatically prompt you on how to confirm/select voltage
and frequency as shown in the following.
WARNING!
Only trained personnel familiar with the construction and the equipment may carry out
the Start-Up procedure.
NOTE!
Wait approximately 30 seconds for the system to boot up and carry out self test.

XR Battery Enclosure

Utility
breaker
UPS