FUTEK IPM500 (D500) Digital Display - Manual (Page 14)

Revision 04
Internal Input Range Jumper
*If the sensor in use has a Rated Output greater than 2.5 mV/V then it is necessary to change the input
range on the meter. For sensors with a Rated Output from 2.5mV/V to 5.5mV/V it is necessary to use the
0-50mV range.
*If you are using the 0-50mV range then it is also necessary to enter that into the meter. Enter the
InPut menu and select Strn as your input type and ‘50’ as your range.
13