Nilfisk-ALTO L-16 - Manual (Page 10)

9
6 4.5 STEREO INPUTS
These are Channel 9 through 16. They are organised
in stereo pair (9/10 and 11/12 pairs also feature XLR
Mic inputs 9 and 10) and they are provided with 1/4"
TRS phone sockets.
If you connect only the left jack, the input will operate
in mono mode.
Your L-16 also provides the practical input level setting:
MIC GAIN (the adjustable range is from 0dB to 60dB)
for MIC 9/MIC 10 and LINE GAIN (the adjustable range is
from -20dB to +20dB) for LINE IN 13/14 and LINE IN 15/16.
4.6 EQUALISER
RIGHT
LINE IN 12
(MONO)
LEFT
BAL/UNBAL
MIC 10
10
60dB 0dB MIC
LINE IN 13
LEFT
(MONO)
RIGHT
LINE IN 14
LINE
GAIN
13/14
+20 -20
0
LINE IN 11
MIC
GAIN
1 2
3
6
The mono input channels (channel 1- channel 8) are equipped
with 3 band MID sweep EQ: HI band, MID band and LOW band;
And the stereo channels (channel 9-channel 16) are equipped
with 4 band fixed frequency equalization: HI band, HI-MID band,
MID-LOW band and LOW band. All bands provide up to 15dB
of boost or cut.
4.6.1 HI
4.6.2 MID
7
8
4.6.3 HI-MID 9
DFX1
(INT)
DFX2
BAL
(EXT)
RIGHT LEFT
3
0 4
0
PRE
POST
HI-MID
3kHz
500Hz
80Hz
LOW
MID-LOW
AUX 1
2
0
+15 +15 -15 -15
0
0
+15 -15
0
+15 +15 0 -15 -15
+15 -15
12kHz
EQ
0
HI
- +15 8
- +15 8
- +15 8
- +15 8
POST
+15 +15
0
-15 -15
+15 +15 -15 -15
80Hz
LOW
8kHz
0
100Hz
FREQ
+15
800
-15
MID
0
EQ
HI
12kHz
DFX1
(INT)
DFX2
PAN
(EXT)
RIGHT LEFT
3
0 4
0
PRE
POST
AUX 1
2
0
0
- +15 8
- +15 8
- +15 8
- +15 8
7
8
9
This is the Treble control. You can use it to get rid of high
frequency noises or to boost the sound of cymbals or the
high harmonics of the human voice. The gain range goes
from -15dB to +15dB with a center frequency of 12 kHz.
This is the Midrange control. It provides 15dB of boost or
cut, flat at the center detent and the FREQ knob sets the
center frequency, the adjustable range is from 100Hz to
8kHz. It can affect most fundamental frequencies of all
musical instruments and human voice. An attentive use of
this control will give you a very wide panorama of sound
effects.
This control gives you up to 15dB boost or cut at 3kHz.
It is useful for controlling voice. It can accurately polish
your performance via adjusting this knob.