MadgeTech RFTemp2000A - Manual (Page 6)

Product User Guide
The base provided with the RFTemp2000A can be used in two ways.
• The bottom of the logger snaps in place to use and mount the unit on a table top or
horizontal surface.
• The base can also securely snap to the backside of the logger for wall mounting if desired
(as shown below).
• There are two holes in the base to allow for screws for mounting.
Mounting Instructions
4
Still need help?
For more troubleshooting tips and information, refer to the built in help
section of the MadgeTech 4 software, visit our Knowledge Base online at
www.madgetech.com/kbase or contact us for customer support at 603-456-2011.