MadgeTech TCTemp2000 Data Logger - Manual (Page 14)

Page 13
MadgeTech TCTemp2000
5.4 Units
Pressing the F3 key while viewing the Main Screen will access the Units Selec-
tion screen. Here the measurement units can be easily changed. In the Units
Selection screen the F1 and F2 function keys correspond to the two channels
internal temperature and external probe respectively. Selecting a channel by
pressing its corresponding function key allows the user to change the units
by either pressing the function key repeatedly or using the UP and DOWN
keys to scroll through the list of available units. Selecting OK (either by press-
ing the OK button or the F4 key) accepts and confirms the unit selection.
Pressing the CANCEL key cancels the unit changing action and reverts to
the previously selected units. The TCTemp2000 offers most commonly used
units.
5.5 Setup Menu
Pressing the F4 key while in the Main Screen will display the Device Con-
figuration screen. From this menu, changes can be made to most of the
TCTemp2000’s display configuration including the screen contrast, size
of the channel view in the main screen, as well as display of the channels.
Power status can also be viewed including battery power remaining and the
presence of external power, and options regarding the LCD display and the
backlight can be modified. The setup menu is also the place to find basic
information regarding device identification, calibration parameters, and
firmware details.
5.5.i Display
From the Display section, the number and identity of channels shown on the
main screen can be changed and set, the LCD screen’s contrast values can be
changed and set, and the size the channel information appears on the main
screen can be changed and set. Pressing F1 while in the Setup Menu brings
up the Display section.
5.5.i.a Adjust Visibility
The first screen that appears in the Display section is the Adjust Visibility
screen. Here the F1 and F2 keys correspond to the internal temperature
and external probe channels respectively. Pressing one of these function
keys results in highlighting its corresponding channel function tab. While
a channel is highlighted the corresponding display function can be
toggled between “Hide” and “Show”, with “Hide” indicating that the
channel will not be displayed on the main screen and “Show” indicating