JJC RM-E2 User Manual
Page 2
2. After sliding the latch in the direction shown to unlatch the battery holder, remove the
holder.
3. Remove the battery from the battery holder.
4. Insert a fresh battery with the face marked "+" on top.
5. Slide the battery holder into the remote until the latch clicks into place.
z Specification
z 100% compatible with Nikon MLL3 infrared remote controls..
z Easytoreplace CR2025 lithium battery.
z Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).
z Typical Battery Life: up to 3 years, 20,000 exposures.
z
1
When the remote control is not in used for an extend period of time, please remove
the battery from the remote control.
2
Do not leave the remote control in any places exposed to excessive heat, humidity
3
Do not leave remote control on or near a television, refrigerator, or other appliance
with a magnetic field.
4
If the remote control gets wet, wipe it with a dry towel as soon as possible.
5
Do not use organic solvents, such as alcohol or paint thinner when cleaning the
remote control.
Compatible with NIKON Cameras
D3000
D5000
D90
D80
D70s
Digital SLR
D70
D60
D50
D40
D40x
Film SLR
F65 F75 N65 N75
Coolpix
9000
8800
8400
P6000
LiteTouch
150ED 140ED 130ED 110S
100W
Nuvis
Nuvis S
Copyright of JJC Technology Company
2