JJC RM-E6 - Manual (Page 2)

1. The remote control is powered by a three-volt CR2032 lithium battery which is already
included in.
2. After sliding the latch in the direction showing how to unlatch the battery holder, remove
the holder.
3. Remove the battery from the battery holder.
4. Insert a fresh battery with the face marked "+" on top.
5. Slide the battery holder into the remote until the latch clicks into place.
z Specification
• 100% compatible with Pentax Remote E infrared remote controls.
• Works with all remote shutter release control modes (Quick-response, W/T Zoom).
• Easy-to-replace CR2025 lithium battery.
• Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).
• Typical Battery Life: up to 3 years, 20,000 exposures.
z Care and Storage
1. When the remote control is not in used for an extend period of time, please remove
the battery from the remote control.
2. Do not leave the remote control in any places exposed to excessive heat, humidity
3. Do not leave remote control on or near a television, refrigerator, or other appliance
with a magnetic field.
4. If the remote control gets wet, wipe it with a dry towel as soon as possible.
5. Do not use organic solvents, such as alcohol or paint thinner when cleaning the
remote control.
z Canon DSLR/SLR part compatible with Canon Cameras
300D 350D 400D 450D 500D
REBEL XSI KISS X2 Digital Rebel Digital Rebel XT Rebel T1i Digital SLR
5D Mark II EOS 7D 550D Rebel T2i
ELAN 7 10 30 33 50
55 100 300v 300x 3000v QD Film SLR
Rebel K2 Rebel T1 Date Rebel T2 Date Kiss III Kiss III L
APS SLR EOS IX
SureShot
(Prima Super)
Z180u Z155 120
ELPH 370Z Z3
z Canon DC part compatible with Canon Cameras
Pro 1 G6 G5 G3
G2 G1 S1 IS S70* Power Shot
S60* Pro 90 IS
*Only work with shutter function.
Copyright of JJC Technology Company