Milestone XProtect Advanced VMS 2014 - Manual (Page 17)

Milestone XProtect ® Advanced
VMS 2014
Administrator's Getting
Started Guide
www.milestonesys.com 17 Install the system
c) Log into each of the computers to install:.

Log server.

Event server.

Management Client.
d) Open an Internet browser, paste the address of the Management server's download web
page into the address field and download the relevant installer.
e) Run the installer.
12. Install the recording server on a separate computer, see Install the recording server (on page
17).
Install the recording server
Once you have installed the management server, download the separate recording server installer
from the management server's web page.
See Install a failover recording server (on page 27) if you want to install a failover server.
1. On the management server, go to the Management server's download web page from
Windows' Start menu.
2. Select Programs, Milestone, Administrative Installation Page and copy the Internet
address.
3. Log into the computer where you want to install the recording server.
4. Open an Internet browser, paste the address of the Management server's download web page
into the address field and select the Recording Server installer. Save the installer somewhere
appropriate and run it from here or run it directly from the web page.
5. Select the Language you want to use during the installation. Click Continue.
6. Select:
Typical: to install a recording server with default values, or
Custom: to install a recording server with custom values.
7. Specify the recording server settings:
o Name.
o Management server address.
o Path to save recordings, and click Continue.
8. If you selected Custom:
a) Specify the number of recording servers you want to install on this computer. Click Continue.