Milestone Pelco KBD300A Keyboard Smart Client Plug-in - Manual (Page 11)

XProtect
®
Pelco KBD300A Keyboard Smart Client Plug-in
www.milestonesys.com Page 11 Configuration & Licensing
Example: pressing digits 1 and 2 on the numeric keypad followed by ’ACK’ (default), send the instruction that is
defined as number 12 in the generic actions list to the SmartClient. If no instruction is defined for generic action
12, nothing happens.
In the Keyboard Setup dialog you define the instructions (actions) that are executed when you press a number (1
- 12) followed by the ACK key. The Drop-Down button appears on the selected row. A click on this button displays
a list of all available SmartClient instructions, where you can select one to assign to the current rows number. The
list looks like the below example of a possible assignment.
You can configure the number of configurable generic actions by changing the value of the NumericUpDown.
The highlighted number is the number of configurable actions displayed in the setup form. In the example above
this number is 12.
Example of Select Camera
To configure “Select Camera” function,
•
Make sure camera number (shortcut) is defined, which are used to identify each camera. This can be
defined in the Management Client (XPCO)/Management Application(XPE), each camera's shortcut
number is specified in the Shortcut field in the Client .
To access the Client tab, select the required camera in the overview pane, then select the Client tab in
the properties pane.
•
Configure action from the setup module. This action is set to CAM by default.
•
The function can be activated by pressing a number followed by pressing CAM on the device. E.g. press
65 and CAM will switch to camera with shortcut ‘65’.