Introduction – Milestone Matrix Monitor 2.3 User Manual
Page 6
Milestone XProtect
®
Matrix Monitor 2.3
User's Manual
www.milestonesys.com
6
Introduction
Introduction
Milestone XProtect Matrix is an integrated product allowing distributed viewing of video from any camera on any
monitor on a network operating with selected Milestone XProtect surveillance systems.
A computer on which Matrix-triggered images can be shown is known as a Matrix recipient. Being able to view
Matrix-triggered images requires that either an XProtect Smart Client (see separate manual available for
download r the Matrix Monitor application is installed on the Matrix
recipient. This manual covers the Matrix Monitor application.
Example: Viewing images in
the Matrix Monitor application
There are two ways in which Matrix-triggered images can appear on a Matrix recipient:
Another user wants to share important images, and sends them to the required Matrix recipient
The images are sent to the required Matrix recipient automatically when a predefined event occurs; for
example when a door sensor detects that a door is opened, or when the surveillance system detects
motion in the images from a camera
As part of the image exchange between computers on the Matrix-enabled surveillance system, other computers
are able to send commands to Matrix recipients. The commands typically tell the Matrix recipients to connect to,
or disconnect, image feeds from a particular cameras. Exactly which computers are allowed to send commands to
your Matrix recipient is defined as part of the configuration of your Matrix Monitor application.