MXL FR-402 - Manual

Thank you for purchasing an MXL FR series boundary microphone.
With proper care, these microphones will provide many years of
satisfaction. For best results, please take a few moments to review this
literature.
General Characteristics
MXL FR series boundary microphones feature multiple capsules, (three
in the FR 400 and 401M, two in the FR 402) to ensure a wide yet
controlled pick up pattern. They have been designed with high quality
FET pre-amps, to ensure outstanding audio quality under even the most
demanding conditions. The FR series boundary microphones require
48v phantom power to operate. Phantom power is available from most
professional video cameras and mixers.
The MXL FR-400 has a switch located on the bottom of the
microphone, which can boost or cut low frequencies by 6dB to balance
the frequency response for different applications. Experimentation with
both positioning and selection of the most suitable microphone for any
given application is recommended, as both can have a pronounced effect
upon the quality of recordings.
If for any reason you get no sound from your FR series boundary
microphone, please check that phantom power is being correctly supplied.
Care
Dust and foreign material can degrade the performance of a microphone
over time so always store the unit in a warm dry place. Remove
fingerprints from the exterior with a clean, dry soft cloth.
FR-Series
Boundary Microphone
Marshall Electronics
1910 East Maple Ave. El Segundo, CA 90245
Phone: (310) 333-0606 Fax: (310) 333-0688
E-mail: [email protected]
www.MXLmics.com
Warranty
MXL FR series microphones are guaranteed against defects in material and
workmanship for ONE year from date of purchase. Should you encounter any
problem with this unit, promptly contact the company you purchased it from
for assistance. The original dated sales receipt will be necessary for any warranty
claim. Do not send any unit directly to us without prior authorization from our
service department! Warranty coverage is limited to repair or replacement (at
our option) of the microphone, and does not cover incidental damages due to
use of this unit, nor damage caused by accidental misuse of this product.