Aspire Digital 6935G - Manual (Page 53)

Chapter 2 43
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
Parameter Description Format/Option
System Time Sets the system time. The hours are
displayed with 24-hour format. Format: HH:MM:SS
(hour:minute:second) System Time
System Date Sets the system date. Format MM/DD/YYYY (month/day/
year)
System Date
System Memory This field reports the memory size of
the system. Memory size is fixed to
640MB.
Extended Memory This field reports the memory size of
the extended memory in the system.
Extended Memory size=Total memory
size-1MB.
VGA Memory Shows the VGA memory size. VGA
Memory size=64/128MB.
Quiet Boot Determines if Customer Logo will be
displayed or not; shows Summary
Screen is disabled or enabled.
Enabled: Customer Logo is displayed,
and Summary Screen is disabled.
Disabled: Customer Logo is not
displayed, and Summary Screen is
enabled. Option: Enabled or Disabled
Power on display Auto: During power process, the
system will detect if any display
device is connected on external video
port. If any external display device is
connected, the power on display will
be in CRT (or projector) only mode.
Otherwise it will be in LCD only mode.
Both: Simultaneously enable both the
integrated LCD screen and the
system’s external video port (for an
external CRT or projector). Option: Auto or Both
Network Boot Enables, disables the system boot
from LAN (remote server). Option: Enabled or Disabled
F12 Boot Menu Enables, disables Boot Menu during
POST. Option: Disabled or Enabled
D2D Recovery Enables, disables D2D Recovery
function. The function allows the user
to create a hidden partition on hard
disc drive to store operation system
and restore the system to factory
defaults. Option: Enabled or Disabled