Advantek Networks Advantek 8 Port 10/100Mbps Ethernet Switch ANS-08P User Manual
Page 4
Front panel LED indicators
After installing the switch, you can check its status from the LED indicators on the front panel
shown below.
Front View
LED
Color
Status
Indication
POWER (PWR)
GREEN
ON
The switch is power on
OFF
The switch is power off
LINK / ACT
GREEN
ON
A link is established
BLINKING
A link is established and data is being
transmitted or received
Rear panel ports
Back Panel
Ports 1x - 8x :The switch has eight 10/100Mbps RJ-45 ports where you can connect computers or
network devices to the switch.
AC IN : This port connects the AC power adapter.
Power Connecting
Plug the circle end of the power adapter firmly into the power port on the switch rear panel, and
the other end into an electric service outlet, then the system is ready.
Connecting computers to the switch
The switch features auto-MDI/MDIX crossover detection function and provides plug-and-play
capability. Users can immediately use any of the features of this product simply by plugging the
network cables (RJ-45) into the computers and the switch.