NUUO Crystal Titan - Manual (Page 3)

1
Step 1: Unpack the Unit
This package contains the following items:
 The unit, Quick Start Guide, screws for disk drives, key, power cord,
warranty card, CD with Install Wizard, NuClient, Backup Player
and Offline License Tool application, user manual, and quick start
guide.
Step 2: Install Hard Drives
Refer to compatibility list and install HDDs. For optimal performance
consideration, install disks with the same model and storage capacity.
The available RAID level depends on the amount of disks installed.
Step 3: Connect to the Network
Enable the DHCP function within the network, as the unit will retrieve an
IP address through DHCP by default.
Step 4: Connect the Power
Press the power button once connecting the power.
Step 5: Install the Software
Insert the CD into your CDROM and double-click Setup.exe to begin
installation.
Step 6: Set up the Unit
The software Installation Wizard performs the setup procedures on the
unit. After the procedure, you can begin using it.
1. Go to Start > NUUO Crystal Series > NUUO Install Wizard.
2. This program will show the default language setting and initiation
mode.
3. Choose your preferred language and initiation mode, and then click
the button.