NUUO SCB-C24 - Manual (Page 12)

The Intelligent Surveillance Solution
NUUO NVR/DVR/Hybrid NDVR System
- 11 -
3.2. Back to Initial
The dip-switch supports “Back to Initial”, a function that puts a set of communication settings back to “initial”
state in case they cannot be remembered and thus disable C24 from being communicated with.
The “initial” state represents:
Setting Value
ID 00
BD 9600
DF 00
Name: TRPC24
To bring C24 “Back to Initial”:
Step 1: Close Mainconsole if it is opened.
Step 2: Connect C24 to power if you haven’t.
Step 3:
Adjust dip-switch toggles to “off-off” position.
Step 4: Disconnect C24 from power.
Step 5:
Adjust the toggles to “on-off” position.
Step 6: Reconnect C24 to power.
Step 7:
Adjust the toggles to “off-on” position and C24 goes back to initial.