Airpura Industries I-600 - Manual (Page 2)

To vacuum the pre-filter
Filter Maintenance and Replacement
The HEPA Filter
Use the brush attachment on your vacuum cleaner
Vacuum slowly around the mesh surface of the filter chamber
The Pre-Filter
Can be vacuumed from the exterior of the unit
once a month or more often.
Should be replaced at least after 12 months of use
Should be replaced as required; at least every 5 years
of residential use
Turn over
the Airpura Remove the
4 retaining
screws Take off
the cover
To open the filter chamber
Remove the
gasket
Unfold the filter slider
(Supplied with replacement
filters or on request
Part#6F 001)
Roll it into a spiral
Insert the tube into
the filter chamber
inside the pre-filter Let the spiral open
to fill the opening Open the top of
the spiral to make
a slight funnel Insert the Hepa
filter into the
funnel and hold it
straight
Let the filter
slidedown the
filter slider Pull the filter slider up
out of the cavity using
both hands and let the
filter slide to the
bottom of the cavity Remove the filter
slider and fold it
for further use
Place a felt gasket
at the bottom of the
filter chamber Position the pre-filter
inside the filter chamber
See over for
closing the
filter chamber