Prochem Aqua Helix - Manual (Page 10)

10
Maintenance
Components
1. Handle
2. Latch, Height Adjustment
3. Vacuum Tube
4. Head Mounting Screws
5. Vacuum Head Top
6. Vacuum Head Base
Cleaning the Extraction Tool
Perform after each job.
1. Disassemble the vacuum head.
NOTE: Remove vacuum head base by removing the
four phillips screws from the corners of the clear
vacuum head top, that connects it to the vacuum
head base.
2. Clean thoroughly as per IICRC500.
3. After cleaning towel dry parts or allow to air dry
completely.
4. Re-assemble the extraction tool. Avoid over tight-
ening the screws.
1
2
3
4
5
6
86366930 Aqua Helix