Prochem Triad AFD - Manual (Page 8)

8
Maintenance
Cleaning
Perform after each job.
1. Dispose of all filters properly as per IICRC S520.
2. Disassemble the AFD and clean thoroughly as per
IICRC S520.
NOTE: The rotomold halves of the AFD can be
sprayed with water since the AFD contains no
electronics or other components that can not be wet.
3. Towel dry parts or allow parts to air dry.
4. Install new filters.
5. Re-assemble AFD.
6. Place clean AFD into a bag and close bag until
next use.
86337980 Air Filter Device