Application, Dip tank spray booth – Pyro-Chem MONARCH Industrial User Manual
Page 2
CONGRATULATIONS:
You have purchased a fire extinguishing system designed and produced by the premier manufacturer of extinguishants
over the past 30 years. However, to guarantee the maximum effectiveness of your new Pyro-Chem PCI Series fire
extinguishing system, you, as the owner/manager, must become familiar with your new equipment. For this purpose, we
are pleased to provide you with this owner’s manual which will contain the following information:
APPLICATION
IN CASE OF FIRE
MAINTENANCE
MANAGEMENT RESPONSIBILITY
APPLICATION
The Pyro-Chem PCI Series System is a pre-engineered industrial fire extinguishing system, tested and listed by
Underwriters Laboratories, Inc. under EX3437. Your authorized Pyro-Chem installer will install your system within the UL
Listed design parameters. The following hazard areas of your industrial equipment should be considered for system
protection:
DIP TANK
SPRAY BOOTH
1. Tanks & containers containing flammable liquids.
2. Solid combustible materials.
3. Electrical equipment.
4. Spray areas.
5. Plenum areas in booths.
6. Exhaust vent ducts in booths.
006261PC
006262PC
FILTER BANK
PART CONVEYOR
WORK
AREA
PLENUM
AREA
EXHAUST
VENT
DUCT
UNCLOSABLE
OPENING
ACCESS DOOR
(Normally Closed)
UNCLOSABLE
OPENING