ROTRONIC CF5 - Manual (Page 6)

Dokument
Rev
Page
6 (7)
Figure 3 The CF5 printed circuit board with CO
2
sensors for measuring ranges 0-3000ppm, 0-10% and
0-25%. PCBs with long temperature sensors are for duct mounting. The start point jumper is not
mounted on some models.
Figure 4 The CF5 for duct mounting. The temperature probe is the black body in the sampling tube.
Figure 5 Terminals and jumpers on CF5. The darker positions are default settings. The start point
jumper is not mounted on some models.
+
~