Setra System Model 370 - Manual (Page 19)

3.10 PRINTING SYSTEM STATUS
To get a summary of the condition of all active functions, press SETUP, then
press PRINT. A sequence of information will be printed indicating the range of
the gauge and the status of any functions which are currently in use, as shown
in this example.
STATUS
ELEV: 256 FT
MAX: 14.4193 PSI
MIN: 14.5188 PSI
HI ALARM: 15.8000 PSI
LO ALARM: 11.0000 PSI
ZERO: 1.0000 PSI
UNIT: 689.47 PSI
The actual messages will vary depending on which functions are in use.
3.11 INTERFACING WITH A COMPUTER
Your Setra Digital Pressure Gauge is designed to interface with a wide
variety of computers. If your gauge is connected to a computer, you can
transmit information to the computer using the simple procedure given for
"Printing Information."
For more advanced and versatile print functions, see Appendix III - "RS-232
Serial Data Communications."
13