Airlink101 10/100/1000Mbps PCI Adapter AGIGA32PCI User Manual
Quick installation guide
Ver. 2A
Package Content:
• 32-bit PCI Gigabit Ethernet
Card
• Driver Disk
• Quick Installation Guide
1
Model # AGIGA32PCI
Section 1
Installing Hardware
Step 1
Shut down the computer, unplug its power cord, and remove the chassis
cover.
Step 2
Insert the Ethernet card into a PCI slot on the computer and secure it with
a chassis screw.
Step 3
Cover the computer’s chassis.
Step 4
Connect an Ethernet cable to the RJ-45 port of the Ethernet card.
Step 5
Re-plug the power cord and turn on the computer.
Section 2
Installing Driver
Note: The following steps and screen shots are for
Windows XP. Steps for other Windows operating
systems will be noted beneath each screen shot.
Step 1
At the Found New Hardware Wizard, select Install from a list or
specific location (Advanced) and click Next.
Windows 2000: Click Next at the Found New Hardware Wizard. Select
Search for a suitable driver for my device (recommended) and click Next.
Windows ME: Click Next at the Add New Hardware Wizard. Select Specify
the location of the driver (Advanced) and click Next.
Windows 98SE: Click Next at the Add New Hardware Wizard. Select Search
for the best driver for your device (Recommended) and click Next.
10/100/1000Mbps PCI Adapter
Quick Installation Guide