Timeguard TR 608 top2 - Manual (Page 22)

22
OBELISK top2 memory card
Use memory card (see fig.)

Insert memory card in the time switch.
 Read / read out saved switching times and
device settings in the time switch or start
Obelisk program.
 Remove memory card
OBELISK top2
(No. 9070404) after
copying
 Avoid mechanical stress
or dirtying with other
storage/transport methods.
Copy OBELISK  Time switch
This copies the switching program (all stan-
dard and special programs) and optionally
all time switch (e.g. Position, offset, external
input, time format etc..) from the memory card
in the time switch.
Copy TIME SWITCH  OBELISK
This copies all switching programs and settings
from the time switch to the memory card
  
OBELISK
COPY
OBELISK ->
TIME SWITCH
COPY TIME
SWITCH ->
OBELISK
RUN
OBELISK
CHECK
OBELISK
TRANSCRIBE
OK
OVERWRITE
OK