Timeguard TR 612 top2 - Manual (Page 2)

Fir Fir st contact st contact
RESET (only in case of emergency): If you perform a RESET of the timer, the individual settings will be deleted. The programmes switching times
remain intact. Press the RES key with and a pointed object for approx. 1 second.
The decision Yes , confirms the
selection or programming.
The decision No , means
continue.
According
to version
According
to version
Set or amend by pressing the
or keys.
For programming, viewing or deleting
First of all read the text display.
Menu selection
Select by pressing the Prog key.
Confirm by pressing .
By pressing the key select the desired menu.
e.g. New, View or Delete.
Confirm your selection by pressing .
Set or change: by pressing or .
Store by presssing .
To display the switching times:
In the menu View, press the
key several times.
The timer is delivered in so-called sleep mode. To
increase the power reserve the switch clock changes to
the sleep mode after approx. 15 minutes.
To activate without a service voltage
Briefly press the
key.
Activate with mains voltage
If the timeswitch is already pre-programmed with
the actual time, the weekday, and the changeover
setting for Summer / Winter time, the actual time
and status display appears after selection of the
national language.
If the timer is not pre-programmed
First select your national language and then enter
the actual date and time.
Activate the clock,
select the national language
By pressing the
or key select your national
language.
Store your selection by pressing the
key.
Info Info