Timeguard LUNA 110 - Manual (Page 6)

6
Display and control elements
I : 2 - 35 Lux
II : 35 - 200 Lux
III : 200 - 1000 Lux
IV : 1 - 5 klx
V : 5 - 50 klx
min
min
max
LUNA
1
10 Lux
1 2 3
LUNA 109
LUNA 110
Lux
2000 2
Test
1 2 3
LUNA
109
Potentiometer for setting the brightness: 2-2000 lx
Key Test for checking the installation (independent of
brightness)
Immediate display of the switched condition by means
of a red LED
Display of channel condition by means of a green LED
(relay)
Potentiometer for setting the brightness treshold
Potentiometer for setting the brightness range:
and PERM ON/PERM OFF (test)
– I: 2–35 lx
– II: 35–200 lx
– III: 200–1.000 lx
– IV: 1.000–5.000 lx
– V: 5.000–50.000 lx
+ as described above
Potentiometer for switch ON/switch Off delay
(0 to 20 min.)
LUNA 109_LUNA 110_310 317_GB 28.07.2008 8:11 Uhr Seite 6