Timeguard LUNA 111 top2 - Manual (Page 8)

8
Initial start-up
Set language, channel and measured value
The device is preset at 15 lx for switch on/switch off
level.
Press required key and display follows
on screen (see picture).
If all settings are performed,
the screen alternately shows the auto-
matic display and READING.
If a sensor is connected, the
measured lux value appears on screen
(only during mains operation).
GERMAN CHANNEL
C1
READING
Typical brightness values
Daylight (bright) 80.000 lx
Office accommodation 500 lx
Hallways and stairs 100-150 lx
Street lighting 15 lx
Full moon ca. 0.3 lx
LUNA 111_LUNA 112 top2_309 271_GB.qxd 22.07.2008 15:31 Uhr Seite 8