Installation procedure – Timeguard LED200PIRWH User Manual
Page 5
Advertising
4
6. Installation Procedure:
Switch off the power.
Twist-open the wall plate.
Fix the wall plate to the wall.
Attach the device to the wall plate.
Switch On the power.
Unit goes into warm-up period for 40 sec.
Feed the wires through rubber
gasket of the wall plate and attach
to corresponding terminal.
240V
OFF
Ø5mm
60mm
Mounting Screws x2
L N
L N
L
N
LIVE BROWN
BLUE
EARTH GREEN/
YELLOW
NEUTRAL
240V
ON
Advertising