Parts included, Tools and parts needed, Selecting a location – Timeguard SLW2400 User Manual
Page 3
2
Parts included
• PIR Sensor unit.
• Instruction manual. Please keep safe for future
reference.
• Accessory Pack.
Tools and parts needed
• 3 core flexible cable.
• Electric/hand-held drill & bits.
• Terminal or Electricians screwdriver.
• Large slotted/philips screwdriver.
• Wire cutters.
This product is suitable for wall or ceiling mount.
Lighting loads connected must not exceed maximum
2000W filament/incandescent or 500W fluorescent/low
energy lighting.
Do not attempt to install during wet weather, if you are
suffering from nausea or dizzy spells or on
medication with similar side effects. If in any doubt,
consult a qualified tradesperson or electrician.
Not suitable for use with discharge lighting.
Selecting a location
The motion detector has a number of detection zones,
at various vertical and horizontal angles as shown
(see diagram A).
Dusk
Time
C
Lens Mask
Restrict long detection
Restrict RHS detection
Restrict LHS detection
Restrict short detection
D