Timeguard MLSA360N - Manual (Page 13)

12
1. General Information
The unit utilises passive infrared technology to detect heat radiation from moving
human bodies. Upon detection, the lamp will illuminate for a user-determined
time period.
An integral daylight sensor ensures night-only operation.
2. Parts Included
• PIR Sensor Unit.
• Instruction manual. Please keep safe for future reference.
• Accessory Pack.
• Corner mount bracket.
3. Tools & Parts Needed
• 3 core cable
• Electric/hand-held drill & bits.
• Terminal or Electricians screwdriver.
• Large slotted/philips screwdriver.
• Wire cutters.
Lighting loads connected must not exceed maximum 2000W fi lament
or 110W fl uorescent/low energy lighting. It is not recommended to
use this product with discharge lighting. Do not attempt to install
during wet weather, if you are suffering from nausea or dizzy spells
or on medication with similar side effects.
If in any doubt, consult a qualifi ed tradesperson or electrician.