Transmille EA016 User Manual
Page 8
EA016 ENVIRONMENTAL MEASUREMENT ADAPTER
OPERATION MANUAL
Transmille Ltd.
Page 7
Using the EA016 with the
Virtual Front Panel Software
Installing the Software
Insert the CD supplied with the EA016 Environmental Adapter – this should auto
run. If it does not auto run, click START -> Run then run x:\Setup.exe where x is the
drive letter of your CD drive.
Once installation is complete choose START -> ALL PROGRAMS -> EA016
Environmental Adapter to run the virtual front panel
Selecting a COM Port
On starting the virtual front panel for the first time, a COM port selection screen will
be displayed. Click on the COM port which is connected to your 3000 Series
calibrator to continue.
A different COM port can be selected at any time using the
button.
If you are using a laptop to connect to the calibrator, the COM port will
usually be COM 1. A desktop computer will usually be COM 2