Trio Motion Technology PCI 208 - Manual (Page 3)

RJ45
CONNECTOR
(BOTTOM)
A standard ethernet connector is provided to
allow synchronisation between units.
RJ45
CONNECTOR
(TOP)
The bottom 2 pins of the 30 way
high density input connector are
used to provide the 24V dc power
to the MC464. A 24V dc, Class 2
transformer or power source must
be provided.
The 2 pins above the 24V dc supply
are to power the I/O 24 Volts.
The MC464 is grounded via
the metal chassis. It MUST
be installed on an unpainted
metal plate or DIN rail which is
connected to earth.
I/O CONNECTOR
A standard ethernet connector is provided
for use as the primary programming
interface.
The Trio programming software, Motion
Perfect 2, must be installed on a Windows
based PC that is fi tted with an Ethernet
connection. The IP address is displayed on
the MC464 display for a few seconds after
power-up or when an Ethernet cable is
plugged in.
0V AIN
AIN0
AIN1
WDOG+
WDOG-
I 0
I 1
I 2
I 3
I 4
I 5
I 6
I 7
0V I/O
0V SUPPLY
0V CAN/AIN
CAN LOW
CAN EARTH
CAN HIGH
24V CAN/AIN SUPPLY
I/O8
I/O9
I/O10
I/O11
I/O12
I/O13
I/O14
I/O15
24V I/O SUPPLY
24V SUPPLY
!