UEi Test Instruments KMIRP2 User Manual
Page 3
Controlling The Print Head
If you turn the printer off while printing, the print head may stop in the
middle of the line. To return the print head to the left side of the paper,
turn the printer on, then off.
Missing or Misformed Characters
The “_” or “ “ character will show on the print out if the printer has
detected incorrect data due to interference with, or interruption to, the
stream of incoming information.
Common causes for this error include incorrect positioning of, or
distance to printer with reference to the instrument. Obstruction of
the infrared signal or even interference from another infrared emitting
source can also affect the printout.
Environmental Limits
KMIRP2-MAN
P. 2
Operating temperature:
32˚ to 122˚F (0˚ to 50˚C)
Storage temperature:
-40˚ to 140˚F (-40˚ to 60˚C)
Humidity:
5% to 95% relative at 104˚F (40˚C)