Asus Motherboard A7V880 - Manual (Page 53)

ASUS A7V880 motherboard 2-15
2.4.2 Chipset
The Chipset menu items allow you to change the advanced chipset settings. Select
an item then press <Enter> to display the sub-menu.
NorthBridge VIA KT880 Configuration
SouthBridge VIA VT8237 Configuration
DRAM Clock [Auto]
Sets the DRAM Clock.
Configuration options: [Auto] [266 MHz] [333 MHz] [400 MHz]
DRAM Timing [Auto By SPD]
Sets the DRAM timing parameters according to the DRAM SPD (Serial Presence
Detect). When set to Manual, you can manually set the DRAM timing parameters
through the DRAM sub-items.
Configuration options: [Manual] [Auto By SPD]
The following sub-items appear when the item DRAM Timing item is set to
Manual.
NorthBridge VIA KT880 Configuration
******** DRAM Timing ********
DRAM Clock
[Auto]
DRAM Timing [Auto by SPD]
DRAM BUS Selection [Auto]
Primary Graphics Adapter [AGP]
V-Link 8X Supported [Enabled]
V-Link Data 2X Support [Disabled]
AGP Mode [AGP 8X]
AGP Read Synchronization [Disabled]
AGP Fast Write [Disabled]
Graphics Aperture Size [128MB]
AGP Master 1 W/S Read [Disabled]
AGP Master 1 W/S Write [Disabled]
SDRAM CAS# Latency [2.5]
Controls the latency between the SDRAM read command and the time the
data actually becomes available. Configuration options: [1.5] [2.0] [2.5] [3.0]