Brother TD-2120N - Manual (Page 81)

ESC/P Command Reference
- 75 -
5. Control Command Details
ESC i Q 2D barcode (QR Code)
ASCII: ESC i Q or q Data
Decimal: 27 105 81 or 113 Data
Hexadecimal: 1B 69 51 or 71 Data
Format: ESC i Q or q [Parameters] [Barcode data] \\\
(1) (2) (3)
Parameters
(1) [Parameters]
Unlike with 1D barcodes, all parameters must be specified in order, starting from the top.
If a value other than those listed is entered for a parameter, that parameter is specified with its default
value.
1. Cell size
[1-byte decimal] 1
[1-byte decimal] 2
[1-byte decimal] 3
[1-byte decimal] 4
[1-byte decimal] 5
[1-byte decimal] 6
[1-byte decimal] 8
[1-byte decimal] 10 Specifies the dot size per cell side.
Prints 1 dot per cell side.
Prints 2 dots per cell side.
Prints 3 dots per cell side. (default value)
Prints 4 dots per cell side.
Prints 5 dots per cell side.
Prints 6 dots per cell side.
Prints 8 dots per cell side.
Prints 10 dots per cell side.
2. Symbol
type [1-byte decimal] 1
[1-byte decimal] 2
[1-byte decimal] 3 Model 1
Model 2 (default value)
Micro QR
3. Structured
Append
setting [1-byte decimal] 0
[1-byte decimal] 1 Not partitioned. (default value)
Partitioned (*1)
4. Code
number [1-byte decimal] 1–16 Indicates the number of the symbol in a partitioned QR
Code.
5. Number of
partitions [1-byte decimal] 2–16 Indicates the total number of symbols in a partitioned QR
Code.
6. Parity data [1-byte hexadecimal]
00-FF
Value (in bytes) of exclusively OR’ing all the print data
(print data before partition)
7. Error
correction
level [1-byte decimal] 1
[1-byte decimal] 2
[1-byte decimal] 3
[1-byte decimal] 4 High-density level: L 7％
Standard level: M 15％ (default value)
High-reliability level: Q 25％
Ultra-high-reliability level: H 30％ (*2)
8. Data input
method [1-byte decimal] 0
[1-byte decimal] 1 Auto input (default value)
Manual input
Selects whether numbers, English alphanumeric
characters, kanji characters or binary characters are
entered.