Brother PT-9700PC - Manual (Page 43)

17
^MP Mirror printing setting
[ASCII] ^ M P n
[Decimal] 94 77 80 nd
[Hexadecimal] 5E 4D 50 nh
[Parameters] 0≤n≤1
[Description]
・ Specifies whether or not mirror printing is applied.
n: Mirror printing setting
(OFF: 0 (default); ON: 1)
・ This command is a dynamic command.
[Remarks]
・ Invalid if n is a value other than 1 or 0
[Example]
・ To use mirror printing:
Since mirror printing will be enabled, n=1. Therefore, the command will be as follows.
^ M P 1
(5Eh 4Dh 50h 31h)