Aiwa NSX-R71 - Manual (Page 12)

12
En
RADIO OPERATIONS
Manual tuning
1 Turn the Dial Function to select the TUNER
function.
2 Press BAND to select a band (FM, MW or LW).
3 Press f or g to tune in to a station.
"TUNE " is displayed when a station is tuned in.
"1" lights up for FM stereo reception.
"RDS" lights up and the Program Service station name
(see "RDS features") is displayed when an RDS station is
tuned in.
To search for a station automatically (Auto Search)
Hold down f or g.
The unit searches for a station up or down the band and stops
at reception.
To stop the search manually, press f or g.
•Auto Search may not stop at stations with weak signals.
Preset tuning
Preset your favorite stations by either of the following ways
("Manual presetting" or "Automatic presetting") and tune them
in directly by using preset number.
Manual presetting
1 Turn the Dial Function to select the TUNER
function and press BAND to select a band.
2 Press f or g to tune in to the desired
station.
3 Press aSET to store the station.
The preset number, beginning from "1", appears on the
display.
4 Repeat step 1 to 3 to preset other stations.
•You cannot store more than a total of 32 preset stations.
"FULL " is displayed.
Automatic presetting
Scans the receivable frequency range and stores tuned stations
automatically with the preset number.
1 Turn the Dial Function to select the TUNER
function.
2 Hold down RT for 4 seconds until "AUTO
PRESET " is displayed.
3 Press aSET.
If aSET is not pressed within 4 seconds, automatic
presetting is not activated.
The tuning indicator is displayed and scanning begins
with the FM band.
The frequency and the preset number (beginning from 1)
will be displayed when a tuned station is stored.
The display will return to the first stored station when
scanning is finished.
• The unit scans the MW and LW bands if preset numbers are
still available.
• FM RDS stations take priority over other FM stations if more
than 32 stations are available.
• Automatic presetting clears all the previously stored preset
stations.
• If identical RDS stations with alternative frequencies are
detected, only the station with the stronger signal is stored.
• You cannot store more than a total of 32 preset stations.
"FULL " is displayed.