Brother TD-2120N - Manual (Page 47)

P-touch Template 2.0 Command Reference
- 41 -
7. Control Command Details
^CC Change the prefix character
ASCII: ^ C C n
Decimal: 94 67 67 nd
Hexadecimal: 5E 43 43 nh
Parameters
00h≤nh≤FFh
Description
 Changes the prefix character code.
n: Character code
 The default text string for the prefix character is “^”.
 This command is a dynamic command.
Example
 To change the prefix character from “^” to “_”:
^ C C 5Fh
(5Eh 43h 43h 5Fh) (5Fh stands for “_” in ASCII code)
 However, if the printer is later not turned off, then on again, the prefix character remains set to “_”, and the
initialize command, for example, will be “_II” instead of “^II”.